Easy-Kleen Commercial (Gas - Hot Water) Pressure Washer, 2700 PSI - EZO2703G

Easy-Kleen Commercial (Gas - Hot Water) Pressure Washer, 2700 PSI - EZO2703G

3.5 GPM Commercial Duty General Triplex Plunger Pump

• Durable oil bath crankcase, stainless valves & brass manifolds extend pump life
• Adjustable pressure lets you suit the task at hand

5 HP Full 1.15 Service Factor TEFC Electric Motor

• 25' power cord requires 230V, single phase power

Schedule 80 Heating Coil With Stainless Steel Shell

• Achieves a 145°F to 150°F rise in temperature over ambient
• Sealed with ceramic blanket for total efficiency
• Saves on heat-up time & fuel every time you use it

Quality North American-Made Oil-Fired Burners

• Adjustable thermostat for efficiency & dependability; 350,000 BTU

NEMA 4 Water-Tight Control Panel

• Easy to access, with heavy duty on/off cam switch

Rugged 12 Gauge One-Piece Roll Cage Steel Frame

• Powder coated to resist rust & corrosion
• All welded, with a lifting bar for easy transport
• 13" pneumatic wheels on 3/4" axles manuever easily & quietly

Professional Grade Spray Gun

• 5 versatile quick connect nozzles: 0°, 15°, 25°, 40° & soap
• 50 feet of high pressure hose lets you work in a wide area

Specifications

Manuals

Spec Sheet

What our Experts Think

• Built for Demanding Jobs
  Designed for commercial use with tough cleaning power—ideal for construction, agriculture, and industrial sites.

• Powerful Engine
  Equipped with a 6.5 HP Kohler gas engine—reliable starts, solid performance in all conditions.

• High Pressure & Flow
  Delivers 2700 PSI at 3.0 GPM, making quick work of heavy grime, grease, and debris.

• Hot Water Cleaning
  Industrial-grade oil-fired burner system heats water up to 150°F above ambient—perfect for breaking down oil and tough residues.

• Heavy-Duty Coil & Frame
  Features a Schedule 80 heating coil and 12-gauge steel frame with powder-coated finish—built to last.

• Total Mobility
  Includes large 13" pneumatic wheels and a sturdy lift bar for easy transport, even on rough terrain.

Q&A

Q: What engine does the EZO2703G use?
A: It runs on a 6.5 HP Kohler gasoline engine, designed for reliable commercial performance.

Q: What are the PSI and flow rate?
A: It delivers 2700 PSI at 3 gallons per minute, ideal for tough cleaning jobs.

Q: How is water heated in this pressure washer?
A: A 120V oil-fired burner heats water up to 150°F above ambient temperature for effective hot water cleaning.

Q: What kind of pump is included?
A: A commercial-grade triplex plunger pump with a brass manifold and stainless steel valves ensures long-term durability.

Q: What’s the coil and frame construction?
A: The heating coil is Schedule 80 steel, enclosed in stainless steel with ceramic insulation. The frame is powder-coated 12-gauge steel with a roll cage and lifting bar.

Q: What tires and mobility features are included?
A: It has four 13-inch pneumatic wheels for stable, easy transport on various surfaces.

Q: What accessories come with it?
A: Includes a 36-inch wand, 50-foot hose, five quick-connect nozzles, and a downstream chemical injector.

Q: How large is the fuel tank?
A: It holds 10 gallons, supporting extended runtime without frequent refueling.

Q: Is this model CARB compliant?
A: No, it's not CARB compliant and is not for sale in California.

Maintenance Tips

• Engine Maintenance:

• Change engine oil after the first 8 hours, then every 100 hours or annually.

• Replace oil filter every 200 hours.

• Inspect air filter every 50 hours; clean or replace if dirty.

• Check and clean spark plug every 100 hours.

• Pump Care:

• Always run clean water through the system — never run dry.

• Lubricate pump components as specified in the manual.

• Burner System:

• Use clean, filtered diesel fuel.

• Replace burner nozzle and oil filter annually.

• After each use, run cold water through the system for 2 minutes to cool the coil.

• Spray Nozzle & Hose:

• Inspect spray nozzles regularly; clean or replace as needed.

• Check high-pressure hoses for leaks or wear and replace if needed.

• Ensure all connections are tight and free from debris.

• Chemical Injector:

• Use only approved detergents; flush the injector and intake hose after each use.

• Use the correct low-pressure soap nozzle for activation.