Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

Features

• Specifically designed for environments with hostile atmospheric conditions, such as chemicals, high humidity or negative pressure
• Combustion air is brought in from outside the heated area - either from outdoor air or from an adjacent room - eliminating the need to use contaminated indoor air for combustion
• In-shot burners fire each heat exchanger tube for reliable performance, ease of service and decreased noise on ignition
• Same-size vent and combustion air inlets throughout product line makes installation easier
• Longer allowable vent lengths (up to 50′ vs 30′) versus previous line, providing greater installation options
• Round vent pipe and combustion air inlet pipe connection
• Automatic reset vent pressure switch is designed to prevent operation of the main burner in the event there is restricted venting of the flue
• Integrated direct spark control board provides digital control of the air mover, inducer, ignition, gas valve and flame sense
• Control Step Down Transformer used to step down from 115v to 24v for the gas controls, fan delay relay, field supplied motor start and more
• Remote flame sensor verifies ignition of all burners, monitors the flame single and communicates with the integrated circuit board
• High limit control switch is mounted in the air stream and will shut off the gas supply in the event of overheating
• 4" vent & combustion air connection
• Liquid Propane
  
• 200,000 BTU
  
• Direct spark ignition
  
• Single stage - on/off operation
  
• Aluminized steel heat exchanger

Specifications

What Our Experts Think

• 200,000 BTU Heating Capacity: Delivers powerful heating for larger commercial or industrial spaces, maintaining comfortable temperatures even in expansive areas.
• Liquid Propane (LP) Fuel: Ideal for locations without access to natural gas, offering a reliable and efficient fuel source for heating.
• Separated Combustion: Designed to draw air for combustion from outside the building, helping to maintain better indoor air quality by reducing contaminants in the air.
• Direct Spark Ignition: A modern, reliable ignition system that eliminates the need for a standing pilot, reducing energy consumption and lowering maintenance costs.
• Single-Stage Operation: Provides consistent and reliable heating, keeping your workspace at a steady temperature without complex adjustments.
• Aluminized Steel Heat Exchanger: Corrosion-resistant and durable, the aluminized steel heat exchanger helps ensure efficient heat transfer and long-term performance.

Q&A

Q: What is the Modine Commercial Workspace Heater?
A: The Modine Commercial Workspace Heater is a 200,000 BTU liquid propane (LP) heater designed for large commercial and industrial spaces. It features direct spark ignition, separated combustion, single-stage operation, and an aluminized steel heat exchanger for durability.

Q: What size area can the Modine Commercial Workspace Heater heat?
A: This heater is ideal for spaces up to 5,000 square feet, providing powerful and efficient heat for expansive commercial or industrial areas.

Q: How does separated combustion improve the heater’s performance?
A: Separated combustion allows the heater to pull air from outside, enhancing safety and operational efficiency, particularly in spaces with limited airflow.

Q: Is this heater built to last?
A: Yes, the aluminized steel heat exchanger ensures long-lasting durability, even in demanding commercial environments.

Q: Can I install this heater in my commercial space?
A: Yes, it’s designed for ceiling-mounted installation in commercial and industrial settings, saving floor space and providing optimal heating.

Maintenance Tips

• Inspect Gas Supply Lines & Connections – Regularly check gas supply lines and connections for signs of wear or leaks. If any leaks are detected, they should be repaired immediately by a professional.
• Clean the Aluminized Steel Heat Exchanger – Dust and debris can accumulate over time, reducing heat efficiency. Clean the heat exchanger to maintain optimal performance and extend the heater's lifespan.
• Check the Burner & Ignition System – Ensure the direct spark ignition system is functioning correctly. If the heater does not ignite, the burner may need cleaning or parts may need to be replaced.
• Examine the Separated Combustion System – Since this heater features separated combustion, ensure that both the intake and exhaust systems are clear of obstructions, promoting safe and effective operation.
• Test the Safety Controls – Ensure all safety features, such as the high-temperature limit switch and pressure switch, are working as expected. These prevent overheating and ensure safe operation.
• Check Venting System – Inspect the venting system for any blockages, as poor ventilation can lead to inefficient combustion and potential safety hazards.
• Verify Thermostat Accuracy – Ensure the thermostat is reading correctly and calibrate it if necessary. An inaccurate thermostat can lead to improper heating and inefficient energy use.
• Replace Filters – If the system has filters, replace them as needed to maintain airflow and reduce stress on the unit.
• Professional Annual Service – Have a professional inspect and service the heater annually to ensure all components are working efficiently and safely.